And now we can move onto another familiar block, the . . .
From your Month #2, Mini Circle bag, cut the fabrics according to the supplemental cutting list. Remember, when cutting the Mini Circle applique, to fussy cut your circle. And my fabrics were mixed up, as in, the green was the larger square and the light was the smaller square, but it is still big enough to cut the pieces you need.
And now we can move onto Block 3, the . . .
From your Month #2, Four Patch bag, cut the fabrics according to the supplemental cutting list.
Place the top squares in each column onto the bottom squares with right sides together and align the raw edges. Stitch a 1/4" seam along both edges.
Place the Right Hand Column onto the Left Hand Column with right sides together and align and pin/nest the raw edges. Stitch a 1/4" seam along the pinned edge. Press the seam open.
And now we can move onto the last mini block this month, the. . .
Mini Framed Square Block
From your Month #2, Mini Framed Square bag, cut the fabrics according to the supplemental cutting list.
Layout the center square and 4 rectangles as shown below.
Place the small rectangles onto the sides of the center square with right sides together. Align and stitch a 1/4" seam along the edges.
Press the seams outwards towards the black rectangles.
Place the longer rectangles onto the top and bottom of the center square with right sides together. Align and stitch a 1/4" seam along the edges. Press the seams outwards towards the black rectangles.
And Block 4 is done!! The Mini Framed Square should measure 2 1/2" x 2 1/2" unfinished.
And now we can move onto slightly larger blocks, starting with the. . .
From your Month #2, Sashed Half Square bag, cut the fabrics according to the supplemental cutting list. I cut my squares 3" instead of the 2.875" and will plan to trim the HST's.
Using the 3" Pink and White Squares and the Half Square Triangle Directions from Month 1 make 4 Half Square Triangles and trim them to 2 1/2" x 2 1/2".
Layout the 4 Half Square Triangle Units, 4 Side Blue rectangles, and 1 Purple Center square as shown.
Place the center column pieces onto the left hand pieces with right sides together. Align and pin if desired. Stitch a 1/4" seam along the edge of all the units.
Then, place the left hand column pieces onto the center pieces with right sides together. Align and pin if desired. Stitch a 1/4" seam along the edge of all the units.
Press the top and bottom row Inward towards the Blue rectangles. Press the center row outwards towards the Blue rectangles.
Place the Center Row onto the Top row with right sides together. Align and pin/nest the seams. Stitch a 1/4" seam along the pinned edge.
And now, place the bottom row onto the center row with right sides together. Align and pin/nest the seams. Stitch a 1/4" seam along the pinned edge. Press the last two seams open.
And your Block 5 is done and the Sashed Half Square Triangle Block that should measure 5 1/2" x 5 1/2" unfinished.
So now it is time to move on to the. . .
From your Month #2, Half Square Triangles bag, cut the fabrics according to the supplemental cutting list. I cut my squares 3" instead of the 2.875" and will plan to trim the HST's. Also, in this bag is the Gold Large Floral Fabric that can be used to do the "grey holes" in your section piecing. Last Month we did Strip piecing of the background for the "holes" and you cut out the pieces you would need this month to do the same. So you an choose if you want to do the Strip Piecing or just use the Gold Floral. It is completely up to you, and I will continue to give both options going forward in the tutorials ;)
Layout the 9 Half Square Triangle Units as shown.
Place the center column pieces onto the left hand pieces with right sides together. Align and pin if desired. Stitch a 1/4" seam along the edge of all the units.
Then, place the left hand column pieces onto the center pieces with right sides together. Align and pin if desired. Stitch a 1/4" seam along the edge of all the units.
Press the seams open.
Place the Top Row onto the Center row with right sides together. Align and pin the seams. You can use
this little pin trick to align the points of your HST's perfectly. Stitch a 1/4" seam along the pinned edge, and be sure when stitching that you stitch directly along the bottom of the Fabric V made in the seam allowance to ensure a perfect points.
And now, place the Bottom row onto the Center row with right sides together. Align and pin/ with the seams with the
pin trick. Stitch a 1/4" seam along the pinned edge, again stitching directly along the point of the Fabric V. Press the last two seams open.
And your Block 6 is done and perfectly pointed!! The Half Square Triangles Block that should measure 6 1/2" x 6 1/2" unfinished.
And now we only have one block left for this month, the. . .
From your Month #2, Pinwheel in a Courthouse bag, cut the fabrics according to the supplemental cutting list. Again, I cut my squares 3" instead of the 2.875" and will plan to trim the HST's.
Layout the Pinwheel Center Unit and 4 rectangles Cream rectangles as shown below.
Place the small rectangles onto the top and bottom of the Pinwheel Center unit with right sides together. Align and stitch a 1/4" seam along the edges.
Press the seams outwards towards the rectangles. Place the longer rectangles onto the sides of the Pinwheel Center unit with right sides together. Align and stitch a 1/4" seam along the edges.
Press the seams outwards towards the rectangles. And now we repeat for the Dark Blue Rectangles. Place the small rectangles onto the top and bottom of the Sashed Pinwheel Center unit with right sides together. Align and stitch a 1/4" seam along the edges.
Press the seams outwards towards the rectangles. Place the longer rectangles onto the sides of the Sashed Pinwheel Center unit with right sides together. Align and stitch a 1/4" seam along the edges. Press the seams outwards towards the rectangles.
And your Block 7 is done and the Pinwheel in a Courthouse Step Block should measure 8 1/2" x 8 1/2" unfinished.
And that means it is time to start putting all the blocks together. So grab all of your Low Volume Background strips that we cut last month, as well as your blocks and let's get going on . . .
Sewing Section 3
We will start by sewing some "optional" Strip Sets together. For all of these strip sets, press the seam allowance to the Larger Number fabric. These Strip Sets are optional as you can choose to use the Large Gold Floral Pieces or make the "Grey Hole" strip sets. I will be using the Strips Sets in the tutorial, but you use what you like.
From Fabric 11, 12, 13, 14, 15, and 16, sew a 2 1/2" Strip Set together as shown.
From Fabric 17 & 18, sew a 6 1/2" Strip Set together as shown.
Now we will sew Blocks to the Strip Sets. Press the Seams towards the Strip Sets.
Sew the 3/4 Strip Set and the HST Block together as shown.
Sew the 11/12/13/14/15/16 Strip Set and the Square in a Square Block together as shown.
Sew the 17/18 Strip Set and the Half Square Triangles Block together as shown.
Now we start sewing it together into the Section 3.
Sew the Square in a Square Unit and the Half Square Triangles Unit together as shown.
Press the Seams Open.
Sew the Square in a Square/HST Unit and the Pinwheel in a Courthouse Steps Block together as shown, taking note that the longer sashing rectangles on the block are on the sides.
Press the Seams towards the Pinwheel Block.
And your Group 1 - Section 3 is complete. It should measure 16 1/2" wide by 8 1/2" high.
And now we can move on to . . .
Once again, We will start by sewing the Strip Sets together. Press the seam allowances to the Larger Number fabric.
From Fabric 4, 5, & 6, sew a 41 1/2" Strip Set together as shown.
From Fabric 7 & 8, sew a 24 1/2" Long Strip Set together as shown.
From Fabric 7 & 8, sew a 13 1/2" Short Strip Set together as shown.
Now we will sew Blocks to the Strip Sets. Press the Seams Open.
Sew the 7/8 Long Strip Set and the Four Patch Block together as shown.
Sew the 7/8 Short Strip Set and the Mini Framed Square Block together as shown.
Now we start sewing it together into the Section 4 Part 1.
Sew the Mini Framed Square Unit and the Four Patch Unit together as shown.
Press the Seams Open.
Sew the 4/5/6 Strip Set and Framed/4 Patch Unit together as shown.
Press the Seam towards the Strip Set.
Sew the Sashed Framed/4 Patch Unit and Sashed Half Square Triangle Block together as shown.
Press the Seam Open.
And your Group 1 - Section 4 Part 1 is complete. It should measure 5 1/2" wide by 46 1/2" high.
And all that is left for this month is . . .
Once again, We will start by sewing the Strip Sets together. Press the seam allowances to the Larger Number fabric.
From Fabric 1 & 2, sew a 44 1/2" Long Strip Set together as shown.
From Fabric 1 & 2, sew a 8 1/2" Short Strip Set together as shown.
Now we will sew Blocks to the Strip Sets. Press the Seam Open.
Sew the 1/2 Short Strip Set and the Mini Circle Block together as shown.
Now we start sewing it together into the Section 5.
Sew the Mini Circle Unit and the 1/2 Long Strip Set together as shown.
Press the Seam Open.
And your Group 1 - Section 5 is complete. It should measure 2 1/2" wide by 54 1/2" high.
And you are done for this Month!!!
We will sew these Sections all together next month,
so for now, just leave them in the 3 separate sections.
And that is it for BOHO Heart Block of the Month, Month 2 :)
If you have any questions on this tutorial, please don't hesitate to email me at happyquiltingmelissa@gmail.com or leave a comment.
Hope you have so much fun making all of this months blocks and then sewing them all together:) You can actually see the heart starting to form by the end of this month, so fun!!!
Looking forward to Next Month!!