Sunday, March 31, 2013

Happy Easter


Happy Easter, from our house to yours!!

Here's hoping we don't have any belly aches by the end of the day :)


Easter Bunting Tutorial found here :)

Pin It!

Thursday, March 28, 2013

Have You Seen Any Naughty Kittens??

Because it appear's that I have their mittens :)  Laura asked us to make some mittens using Lori Holt's wonderful tutorial for the March Beejeebers block.  She plans to use them in a wonderful "I Spy" quilt where you lay them all out in a mixed up order and then try to find the mates.  Super cute, huh!!!


Oh, and if anyone needs any extra thumbs . . . gotta keep it real ya know :)  I managed to cut my first set of thumbs 3/4" to short.  I guess that happens when you are reading a tutorial, listening to a book, and trying to sort out an argument over which movie the kids get to watch, all at the same time. Sure, we mom's can multi-task, you just don't always like the results you get from doing it :)


Pin It!

Tuesday, March 26, 2013

Read With Me - A MBS Tutorial

Okay, so I have been hinting about this tutorial for about a week and so I am happy to say, that it is now posted!  Introducing . . . Read With Me my newest  Moda Bake Shop Tutorial !!


To say I like this quilt would be a vast understatement.  I absolutely love it and every time I see it I do a little happy dance!!  From the basic idea of doing a  "book quilt" , to adding the appliqued "once upon a time . . ." and finally the super awesome quilting that really pushed my skills ;)  .  I am over the moon excited about this!!!



The quilt measures 58" x 73", just the perfect size for snuggling up with your wee ones with a good story, or for a special one's twin size bed :)  It is made using a Noteworthy jelly roll by Sweetwater and some Bella Solid white and black.  It really is a fun quilt to put together and is very beginner friendly.




And now that this Moda Bake Shop Tutorial has been published for a while, I can now post it here on my blog for your convenience ;)   So just follow along below for the full step-by-step tutorial.  And if you love it, you can get the printer friendly version here :)  



To make your own Read With Me quilt you will need :
1 Noteworthy Jell Roll
2 Yards of Moda Bella Solid White
1/2 Yard of Moda Bella Solid Black
4 Yards of your favorite print for Backing
Applique Templates (at the end of the tutorial)
1/2 yard of Heat N Bond
Twin size or 68″ x 82″ piece of Batting




STEP 1 – CUTTING

Start by breaking out that jelly roll.  Choose 7 strips and set them aside to be used for your binding.  I choose to use the “white” strips for my binding.


From the remaining jelly roll strips, alternating prints and colors for each group cut
   (4) 2 1/2″ x 6 1/2″ rectangles
   (4) 2 1/2″ x 8 1/2″ rectangles
   (4) 2 1/2″ x 9 1/2″ rectangles
   (24) 2 1/2″ x 10 1/2″ rectangles
   (28) 2 1/2″ x 11 1/2″ rectangles
   (28) 2 1/2″ x 12 1/2″ rectangles


From your white yardage cut the following
   (10) 5 1/2″ x Width of Fabric Strips
   (4) 3″ x 15″ rectangles
   (4) 2 1/2″ x 6″ rectangles
   (4) 1 1/2″ x 6″ rectangles
   (36) 1 1/2″ x 2 1/2″ rectangles
   (8) 2 1/2″ x 3 1/2″ rectangles
   (32) 2 1/2″ x 2 1/2″ squares


STEP 2 – BLOCK A

Gather the following size pieces and lay them out as shown.
   (2) 2 1/2″ x 12 1/2″ print rectangles, (3) 2 1/2″ x 11 1/2″ rectangles, and (1) 2 1/2″ x 10 1/2″ rectangles
   (1) 2 1/2″ x 2 1/2″ solid square, and (3) 1 1/2″ x 2 1/2″ rectangle.


Lay the solid rectangles onto the tops of the print strips and sew a 1/4″ seam along the edges.  Press.


Sew the 6 columns together.  Start by placing the second column onto the first, sew a 1/4″ seam along the edge.  Then place the third column onto the now sewn together first and second columns and sew a 1/4″ seam and so on until all 6 columns are sewn together.  Press.


Repeat this step to make a total of 4 blocks each measuring 12 1/2″ x 12 1/2″.



STEP 3 – BLOCK B

Gather the following size pieces and lay them out as shown.
   (1) 2 1/2″ x 12 1/2″ print rectangles, (2) 2 1/2″ x 11 1/2″ rectangles, and (3) 2 1/2″ x 10 1/2″ rectangles
   (3) 2 1/2″ x 2 1/2″ solid square, and (2) 1 1/2″ x 2 1/2″ rectangle.


Lay the solid rectangles onto the tops of the print strips and sew a 1/4″ seam along the edges.  Press.


Sew the 6 columns together.  Start by placing the second column onto the first, sew a 1/4″ seam along the edge.  Then place the third column onto the now sewn together first and second columns and sew a 1/4″ seam and so on until all 6 columns are sewn together.  Press.


Repeat this step to make a total of 4 blocks each measuring 12 1/2″ x 12 1/2″.



STEP 4 – BLOCK C

Gather the following size pieces and lay them out as shown.
   (2) 2 1/2″ x 12 1/2″ print rectangles, (1) 2 1/2″ x 10 1/2″ rectangle, (1) 2 1/2″ x 9 1/2″ rectangle,
        (1) 2 1/2″ x 8 1/2″ rectangle and (1) 2 1/2″ x 6 1/2″ rectangle
   (2) 2 1/2″ x 3 1/2″ solid rectangles, (3) 2 1/2″ x 2 1/2″ solid square, and (3) 1 1/2″ x 2 1/2″ rectangle.


Lay the solid rectangles onto the tops of the print strips on either end of the strip and sew a 1/4″ seam along the edges.  Press.


Sew the 6 rows together.  Start by placing the second row onto the first, sew a 1/4″ seam along the edge.  Then place the third row onto the now sewn together first and second rpw and sew a 1/4″ seam and so on until all 6 rows are sewn together.  Press.


Repeat this step to make a total of 4 blocks each measuring 12 1/2″ x 12 1/2″.



STEP 5 – BLOCK D

Block D has an angled book.  To make this start by slicing a 3″ x 15″ solid rectangle in half diagonally.


Place a 2 1/2″ x 11 1/2″ print rectangle between the 2 triangles, taking care to center the strip.  Lay the strip onto the top triangle.  Sew a 1/4″ seam aligning the raw edges.  Press.  Lay the bottom triangle onto the strip and sew a 1/4″ seam aligning the raw edges.  Press.  Using the ends of the strip as a guide, trim the top and bottom of the unit even with the ends of the strip.


Now gather a 2 1/2″ x 6″ solid rectangle and a 1 1/2″ x 6″ solid rectangle.  Lay the 2 1/2″ strip along the bottom of the block and the /2″ strip along the top of the block aligning the raw edges.  Sew a 1/4″ seam along each edge and press.


Now all that is left is trimming.  The trimming has to be done one side at a time and needs to be precise or you will end up with a floating book.
    Place your long ruler so the top left hand corner of the print strip aligns with the 4 1/4″ horizontal mark on your ruler and the bottom right hand corner of the print strip aligns with the 1/4″ horizontal mark on your ruler.  Trim along the right hand edge of your ruler.
    Place your long ruler so the right hand side of the block aligns with the 4 1/2″ vertical line on your ruler.  Trim along the left hand edge of your ruler.
     Place your long ruler so that the right hand side of the block aligns with the edge of the ruler, the left hand side of the block aligns with the 4 1/2″ vertical line and the bottom right hand corner of the print strip aligns with the 12 1/4″ horizontal mark on your ruler.  Trim along the top edge of the ruler.
     Place your long ruler so that the right hand side of the block aligns with the edge of the ruler, the left hand side of the block aligns with the 4 1/2″ vertical line and the top of the block aligns with the 12 1/2″ horizontal mark on your ruler.  Trim along the bottom edge of the ruler.


You know you will have trimmed correctly if the three corners of the book that are pointed out are 1/4″ away from the nearest edge.


Gather the following size pieces and lay them out as shown.
   (2) 2 1/2″ x 12 1/2″ print rectangles, (1) 2 1/2″ x 11 1/2″ rectangles, and (1) 2 1/2″ x 10 1/2″ rectangles, and a pieced angle book block.
   (1) 2 1/2″ x 2 1/2″ solid square, and (1) 1 1/2″ x 2 1/2″ rectangle.


Lay the solid rectangles onto the tops of the print strips and sew a 1/4″ seam along the edges.  Press.


Sew the 5 columns together.  Start by placing the second column onto the first, sew a 1/4″ seam along the edge.  Then place the third column onto the now sewn together first and second columns and sew a 1/4″ seam and so on until all 5 columns are sewn together.  Press.


Repeat this step to make a total of 4 blocks each measuring 12 1/2″ x 12 1/2″.


STEP 6 – APPLIQUE STRIPS

Now the blocks are done and you can move onto the applique.  If you are new to applique, and need a bit more instruction on how to do it, please see my video tutorial on Applique Basics here.    From your black yardage lined with Heat N Bond cut the following letters using the Read With Me Templates.  


Grab the WOF strips cut in the beginning and cut them into the following pieces.  Sew the pieces end to end to create (2) 5 1/2 ” x 63 1/2″ strips to be used for the side borders, (2) 5 1/2″ x 58 1/2″ strips to be used for the top and bottom borders, and (3) 48 1/2″ strips to be used for the applique.  Set the border strips aside.


Fuse your applique onto the three strips as follows.  For the first strip, start the applique 1″ in from the left and space the applique out over 32″.  For the second strip, start the applique out 8 1/4″ from the left and space the applique out over 32″. And for the third strip, start the applique out 1″ from the right and space the applique out over 32″.


Secure stitch the applique.  It is much easier to do this while it is in a strip, verses once it is sewn into the quilt top.



STEP 7 – ASSEMBLING QUILT TOP

And now you are ready to put the top together.  Lay your 16 blocks out in 4 rows of 4.  You can use the same layout I did or your own, just whatever looks pleasing to your eye.


Once you have your layout, sew the rows together the same way you did with the blocks.  Lay the second block in each row on the first and stitch along the aligned edge.  Then add the 3rd block, and then the 4th.


Press your rows and then lay them back out adding the appliqued strips in between each row.


Sew the rows together.  Once again, use the same process as putting the blocks together.  Just sewing the second row onto the first, and then adding the third and so on until the rows are all sewn together.


Now gather your borders that were set aside.  Place the side borders along the sides of the quilt top.  Sew a 1/4″ seam along the edge, aligning as you go.  Press.  Then repeat the same process for the top and bottom border.  Press.


And your quilt top is finished!!


STEP 8 – FINISHING

So now it is time to turn that finished quilt top into a finished Quilt ;)  Time to  Baste It, Quilt It, and Bind It!!!  Which is a whole lot in one little sentence.  If you are new to quilting, you can see my Finishing Your Quilt Series of video tutorials



And when it came time to quilt mine, I wanted to continue the Once Upon A Time theme.  So here are some of the quilting details.  First is the top of the castle and the clouds :)  To really make the outline of the pictures stand out I quilted over the threads like 3 times so it was super bold.  I really like the depth it gives it!  And I always love some good pebbling!!  The window and clouds are cute and poofie too :)


 The bean stalk on the right hand side was so much fun to quilt.  Once again, I did the outline super dark and heavy, and then I just started with some swirls and leafs.  They were so fun and freeing, I just kept swirling away!!   And then the pink scrolls, love em!!  They are seriously one of my favorite things to quilt!


The drawbridge was my first attempt at wood-grain and then I added  a cute little moat, and  some adorable flowers!!  The grass came out pretty fun too, even though I had no idea what I was doing at the time, I just kept zig and zaging up and down and figured it looks pretty close to grass :)


The final part of the quilting, and it is my favorite, is that each book has a title.  For a family activity, each of the children got to pick their favorite stories . . . one they have read, and ones I have read to them and they were all written onto the books.  I then added my favorites, my husband's favorites, and other family favorites.  

I quilted them in using a loopy cursive just using the machine the same way I would use a pencil.  Which was a little hard in the center of the quilt as I am not the best at writing sideways, but I got through it.  I decided to use a matching thread color because I didn't want bright shiny titles to take away from the overall theme of the quilt and I wanted it to be special for our family, in a quiet kind of way.  And we all love it!!  It has already become a treasured family favorite!



          One adorable 58″ x 73″ Read With Me Quilt that is sure to be a family favorite.  Whether you put it on a bed or just snuggle under it while reading stories, I hope it becomes a treasure.  




I hope you have enjoyed this tutorial and if you make your own Read With Me Quilt I would love to see it!!  You can email me a picture at happyquiltingmelissa@gmail.com, post it to social media with #happyquiltingwithmc  or or add it to my flickr group here ;)  I can't wait to see your Read With Me  Quilts!!!


I will leave you with these adorable little cuties of mine!!  Have a Happy Quilting day!!!


Pin It!