Friday, June 14, 2013

Midnight Frost Table Runner - A Tutorial

So you might recall the row I showed on Monday for the Row along.  Well, since I didn't have time to do all the rows in the row along, I decided I best do something with this row so it didn't end up in a drawer somewhere.  So . . . I opted to turn it into a table runner.  And I even managed to finish it in the same week. Bonus!!!  I took some pictures along the way so I created a little tutorial for you all, enjoy!!


But before we get to the tutorial, let me tell you a bit about these fabrics.  These fabrics are from Modern Yardage, a fun new fabric company based out of Salt Lake.  The really neat thing about Modern Yardage is that they print their fabrics in-house when they are ordered.  Neat huh!  You can read more about the process here.  They have some amazing in-house designers and so many amazing prints to choose from.  And, you even get to pick the scale you would like your prints in, which makes for some great stash builders!!


I loved the feel of these fabrics!!!  They are slightly heavier but oh so soft. (reminds me of Art Gallery fabrics feel)  And, since they print the fabrics on a wider fabric, there is extra room for printing helpful information.  Like where you can find Modern Yardage.


And how you should care for your fabrics.  Isn't that just so fun!!  So take a minute and pop on over to check them out :)  


All right, on to the tutorial!!

**NOTE - For a simplified Printable PDF of this tutorial please follow the link where you can download it for free :)

FABRIC REQUIREMENTS
1/2 yard of Focal Fabric A
1/2 yard of Focal Fabric B
1/2 yard of Background Fabric

STEP 1 - CUTTING

From each of the 2 focal fabrics cut
     (3) 5 1/4" x 5 1/4" squares
     (18) 3" x 3" squares
     (3) 10" x 10" squares   (pieced backing)
         Note - cut your first strip at 10 1/2" then you can can cut your (3) 10" squares and (4) 5 1/4" squares from that strip.  Then cut 2 strips that are 3" wide.  That is 17" so you will have an inch for straightening up :)

From the background fabric cut
     (12) 3" x 3" squares
     (24) 2 7/8" x 2 7/8" squares
     (30 2 1/2" x WOF strips (binding)


STEP 2 - HALF SQUARE TRIANGLES

Gather all of the 3" squares.  Group them into the following pairs. 12 Focal A/Focal B pairs, 6 Focal A/Background pairs, 6 Focal B/Background pairs.   To save time be sure and repeat each of the sub-steps in an assembly line fashion.  On the wrong side of the darker fabric, using your ruler, draw a pen line diagonally from the top left corner to the bottom right corner.


Lay your darker square on your lighter square with rights sides together.  Pin both sides adjacent to that drawn line.  Make sure to put them out far enough that your presser foot won't hit them as you sew on by :)  Stitch a 1/4" seam along both sides of the drawn line (the black lines represent your stitching lines :)  You are doing these assembly line so go ahead and chain stitch all the sets on the right hand side of the line, and then go back and do all the sets on the left hand side.


Clip your threads and then align your ruler along the drawn center line.  Cut your pieces apart along that drawn line.


Now press towards your darker fabric.


And now you are ready to trim up your HST's.  You will trim them to 2 1/2" square.  Start by aligning the 45 degree line on your square ruler with the seam line on your half square triangle.  Make sure that the raw edges of the half square triangle are over the 2 1/2" line's on your ruler.  Trim the 2 sides along the edge of the ruler.


Now spin your block 180 degrees.  Once again, align the 45 degree line on your ruler with the seam line on your half square triangle.  Align the raw edges of the half square triangle under the ruler on the 2 1/2" lines on your ruler.  Trim the 2 sides along the edge of the ruler.


And now you have Perfect Half Square Triangles.  They take a bit to trim but are totally worth it for perfect points!!  You should have 48 Half Square Triangles total.



STEP 3 - FLYING GEESE

Gather all of the 5 1/4" focal fabric squares and the 2 7/8" background squares.  Group them into the piles of 1 local fabric square to 4 background squares. Once again, repeat each of the sub-steps in an assembly line fashion making an entire flock of geese rather than making 1 set of  geese at a time.

With right sides together, lay two background squares onto your focal fabric square as shown.  Using your ruler, draw a pen line diagonally from the top left corner to the bottom right corner.


Now pin both sides of each background square adjacent to that drawn line.  Make sure to put them out far enough that your presser foot won't hit them as you sew on by :)  Stitch a 1/4" seam along both sides of the drawn line (the black lines represent your stitching lines :)  Remember, you are doing these assembly line so go ahead and chain stitch all the sets on the right hand side of the line first, and then go back and do all the sets on the left hand side.


Clip your threads and then align your ruler along the drawn center line.  Cut your pieces apart along that drawn line.


Press your seam up towards your 2 little background triangles.


Now, take 2 more background squares and align them on your two stitched pieces as follows with right sides together.  Once again, draw a diagonal line on the wrong side of the little squares from corner to corner.


Pin each piece far enough out that your foot will go by and then once again, stitch a 1/4" seam along both sides of the drawn diagonal line.  (Remember to chain stitch to save time :)


Clip your threads and then using your ruler aligned along the drawn line cut your 2 separate pieces apart.


Press up toward the background triangles again.  Lastly, trim off the dog ears.


And you are done!!!  Perfectly precise flying geese blocks without throwing away any scraps and without sewing a single triangle.  Fabulous!!  You should have 24 Flying Geese total.


STEP 4 - SEWING BLOCK

Gather (4) Focal A/Focal B HST's, 4 Focal A/Background HST's and 4 Focal A Flying Geese units.  Lay the units out as follows.


We will being by stitching the center together.  Place the right hand unit onto the left with right sides together. Stitch a 1/4" seam along the edge of both pairs.  Press each pair in opposite directions.


Lay the top row onto the bottom with right sides together.  Nest the center seam and pin in place.  Sew a 1/4" seam along the pinned edge.  Press open.


Now you can sew the units into three rows.  Place the side units onto the center units of each row with right sides together.  Pin in place if needed.  Sew a 1/4" seam along the pinned edges.


 Press the center row in and the top and bottom row out.


Place the top row and bottom row onto the center row with right sides together.  Take care to nest the seams and pin them in place.  Stitch a 1/4" seam along both pinned edges.    Press.


And your block is complete.  It should measure 8 1/2" x 8 1/2" unfinished.


STEP 5 - SEWING THE ROW

Repeat Step 4 to make a total of 6 blocks, 3 of each color layout.

Lay the blocks out in a row, alternating the color layout.  Using a 1/4" seam, stitch the blocks into a row.


And the top is done.  Now just to finish it.


STEP 6 - FINISHING

Gather the 10" focal fabric squares and lay them in a row alternating colors.  Using a 1/2" seam stitch the blocks into a row to create the pieced backing.


Create a quilt sandwich and baste it as desired.  Quilt your table runner as desired.  I choose to do straight stitches in the star centers to emphasis the stars (shown in first block) and then a loopy background.


Lastly, simply create a binding strip from your 3 background WOF strips and bind the table runner.  Now just sit back and enjoy.  Almost makes me wish it were snowing, almost :)

I hope you enjoyed the tutorial.  If you make a Midnight Frost table runner I would love to see it.  You can add it to my Flickr group here :)  

Have a Happy Quilting Weekend!!

Linking up this fun little table runner finish to Amanda's and Sarah's :)


Pin It!

21 comments:

  1. The small dots give it a nice texture look:)

    What a great fabric shop that Modern Yardage. They sound really personable!

    ReplyDelete
  2. Love it! Can't wait to try it!

    ReplyDelete
  3. Love! Such a fun runner and a great tutorial!

    ReplyDelete
  4. Wonderful tutorial and beautiful piecing.
    I need someone to sit next to me and whack me every so often so I pay attention, lol.

    Debbie

    ReplyDelete
  5. Thank you for the tutorial. I knew how to make HSTs that way but not the trick for making flying geese. So double thanks for that. I will have to check out Modern Yardage. I hope they ship to APOs.

    ReplyDelete
    Replies
    1. Melissa - I made your Read with Me Quilt from the Moda Bake shop. I don't know how to add photos to your flicker group but if you want to see it I have a blog post up with pics at myordinarymagic.blogspot.com. I linked your tutorial in the post. It was a fun quilt to make. Thanks for the pattern.

      Delete
  6. Lovely table runner and a great tip for the flying geese :)

    ReplyDelete
  7. cute table runner! and love your flying geese mini tutorial. I've never tried them that way, but now I will!

    :) Kelly @ My Quilt Infatuation

    ReplyDelete
  8. Great Tutorial! Thanks. Definitely going to have to check out Modern Yardage.

    ReplyDelete
  9. What a fun tutorial!! Thank you for sharing with us. :0)

    ReplyDelete
  10. Cute runner! And genius flying geese mini tutorial, definitely adding that one to the sewing arsenal! Thanks for the intro to a new fabric shop, just popped over and they have some great prints! And i love that you can get them in different scales!

    ReplyDelete
  11. Very cute! I think it would work really well in seasonal fabrics too, thanks!

    ReplyDelete
  12. Thanks for the tutorial. it is very pretty

    ReplyDelete
  13. That is really pretty. Thanks for the tutorial.

    ReplyDelete
  14. Darling table runner! Thanks for the tutorial. And thanks for introducing me to Modern Yardage. Their fabrics are just beautiful!

    ReplyDelete
  15. Beautiful table runner! I love the fabric choice. It makes the stars seem like they are sparkling. Midnight Frost is the perfect name for it!

    ReplyDelete
  16. This looks beautiful and great instructions. I have all the fabrics with me and will definitely start on the project soon.

    ReplyDelete
  17. Hi Melissa! I'm so glad to have found your tutorial. It's so nice! I am making one right now and so excited to finish. Question, though. Is there are rule on where to lay the seam allowances when you press? How do you make sure the star center does not bulk up too much? Do you backstitch each and every time during piecing? My instincts tell me I should but I just need to hear from the experts. Thank you for sharing this tutorial!
    Anne

    ReplyDelete
    Replies
    1. Hi Anne,
      The tutorial will tell you which way I pressed to help reduce bulk. As far as if there is a standard rule, I always go with, when in doubt, press open ;) And when quilting, I don't ever backstitch when piecing. Occasionally I will backstitch when piecing large rows together if I am worried about them pulling in the long arm as they are not secured down by another seam, but only then ;) I hope this helps ;)

      Delete

Thank you so much for your sweet comments. I just love hearing from you!!
Have a Happy Quilting Day :)

Melissa